m(b,i)3035s, m(b,i)3045s www.vishay.com vishay general semiconductor revision: 15-oct-12 1 document number: 88952 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 schottky barrier rectifier features ? guardring for overvoltage protection ? low power loss, high efficiency ? low forward voltage drop ? high forward surge capability ? high frequency operation ? meets msl level 1, per j-st d-020, lf maximum peak of 245 c (for to-263ab package) ? solder bath temperature 27 5 c maximum, 10 s per jesd22-b106 (for to-220ab and to-262aa package) ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in low voltage, high frequency rectifier of switching mode power supplies, fr eewheeling diodes, dc/dc converters, and polarity protection application. mechanical data case: to-220ab, to-263ab, and to-262aa molding compound meets ul 94 v-0 flammability rating base p/n-e3 - rohs-compliant, commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 e3 suffix meets jesd 201 class 1a whisker test, he3 suffix meets jesd 201 class 2 whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 30 a v rrm 35 v, 45 v i fsm 200 a v f at i f = 30 a 0.61 v t j max. 150 c 1 k 2 3 to-263ab nc a k to-262aa to-220ab 1 2 3 m30xxs pin 1 pin 2 case pin 3 mi30xxs mb30xxs heatsink nc a k k pin 1 pin 3 pin 2 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol m(b,i)3035s m(b,i)3045s unit maximum repetitive peak reverse voltage v rrm 35 45 v maximum average forward rectified current (fig.1) i f(av) 30 a peak forward surge current 10 ms single half sine-wave superimposed on rated load i fsm 200 a peak repetitive reverse current at t p = 2.0 s, 1 khz i rrm 2.0 voltage rate of change (rated v r ) dv/dt 10 000 v/s operating junction and st orage temperature range t j - 65 to + 150 c t stg - 65 to + 175
m(b,i)3035s, m(b,i)3045s www.vishay.com vishay general semiconductor revision: 15-oct-12 2 document number: 88952 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width ? 40 ms ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current derating curve fig. 2 - maximum non-repetitive peak forward surge current electrical characteristics (t a = 25 c unless otherwise noted) parameter symbol test conditions typ. max. unit maximum instantaneous forward voltage v f (1) i f = 15 a t j = 25 c 0.54 - v i f = 30 a 0.65 0.70 i f = 15 a t j = 125 c 0.46 - i f = 30 a 0.61 0.66 maximum instantaneous reverse current at dc blocking voltage i r (2) rated v r t j = 25 c 40 200 a t j = 125 c 26 55 ma typical junction capacitance c j 4.0 v, 1 mhz 980 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol m30xxs mb30xxs mi30xxs unit typical thermal resistance r ? jc 2.0 c/w ordering information (example) package preferred p/n unit weight (g) package code base quantity delivery mode to-220ab m3045s-e3/4w 1.878 4w 50/tube tube to-263ab MB3045S-e3/4w 1.37 4w 50/tube tube to-263ab MB3045S-e3/8w 1.37 8w 800/reel tape and reel to-263aa mi3045s-e3/4w 1.454 4w 50/tube tube case temperat u re (c) 35 15 0 075150 a v erage for w ard c u rrent (a) 25 25 100 5 50 125 10 m30xxs m(b,i)30xxs 30 20 nu mber of cycles at 60 hz 300 150 0 1100 peak for w ard s u rge c u rrent (a) 200 10 50 100 250 t j = t j max. 8.3 ms single half sine-wa v e
m(b,i)3035s, m(b,i)3045s www.vishay.com vishay general semiconductor revision: 15-oct-12 3 document number: 88952 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse characteristics fig. 5 - typical j unction capacitance fig. 6 - typical transient thermal impedance fig. 7 - typical transient thermal impedance instantaneo u s for w ard voltage (v) 100 0.1 0.01 00.9 instantaneo u s for w ard c u rrent (a) 1 0.1 10 0.8 0.7 0.6 0.5 0.4 0.3 0.2 p u lse width = 300 s 1 % d u ty cycle t j = 150 c t j = 125 c t j = 25 c percent of rated peak re v erse voltage (%) 1000 0.1 0.001 10 100 instantaneo u s re v erse c u rrent (ma) 1 20 10 90 80 70 60 50 40 30 t j = 150 c t j = 125 c t j = 25 c 0.01 100 re v erse voltage (v) 10 000 100 0.1 100 j u nction capacitance (pf) 110 1000 t j = 25 c f = 1.0 mhz v sig = 50 mv p-p t - p u lse d u ration (s) 10 0.1 0.01 100 transient thermal impedance (c/w) 110 1 0.1 j u nction to case m(i)30xxs t - p u lse d u ration (s) 10 0.1 0.01 100 transient thermal impedance (c/w) 110 1 0.1 j u nction to case mb30xxs
m(b,i)3035s, m(b,i)3045s www.vishay.com vishay general semiconductor revision: 15-oct-12 4 document number: 88952 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) to-220ab 0.113 (2.87) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) 0.415 (10.54) max. 0.635 (16.13) 0.625 (15.87) pi n 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.035 (0.90) 0.028 (0.70) 0.154 (3.91) 0.148 (3.74) 1 3 2 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) 0.035 (0.90) 0.028 (0.70) 0.055 (1.40) 0.047 (1.19) 0.510 (12.95) 0.470 (11.94) k pi n 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.057 (1.45) 0.045 (1.14) 30 (typ) (ref) 0.411 (10.45) max. to-262aa 123 0.250 (6.35) min. 0.160 (4.06) 0.140 (3.56) 0.950 (24.13) 0.920 (23.37) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.35) 0.350 (8.89) 0.330 (8.38) 0.110 (2.79) 0.100 (2.54) 0.401 (10.19) 0.381 (9.68) 0.185 (4.70) 0.175 (4.44) 0.055 (1.40) 0.045 (1.14) to-263ab 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) mi n . 0.15 (3.81) mi n . 0.33 (8.38) mi n . 0.42 (10.66) mi n . n ca k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) mi n . mounting pad layout
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: vishay: ? MB3045S-e3/8w? m3035s-e3/4w? m3045s-e3/4w? mi3035s-e3/4w? mi3045s-e3/4w
|
